3D printed mascots for Amijami Sushi

A man holds a plate of colourful mascot figures beside 3D printers in a workshop.

Today I want to share one of our first large projects making 3D printed mascots. Amijami Sushi, a well known company in Tallinn, came to us with an interesting idea. They sell children's meals similar to Happy Meal and wanted to include figures of their own mascots instead of standard toys. They had six characters, but these existed only as flat vector artwork. There were no 3D models.

Our designer took on the job and modelled each character by hand. Colour was the next challenge because the characters used four different shades. We used a multicolour 3D printer that automatically changes the plastic during printing.

Then we started choosing the format. We considered pencil toppers, keyrings and fridge magnets. We dropped the pencil topper because it would interfere with the magnet, while figures with flat backs did not look right to us. We chose full figures with two functions. We added a loop for a keyring and hid a magnet inside. We inserted it during printing so the following plastic layers sealed it in without visible seams.

The first prototypes with magnets gave us a funny surprise. We put a figure on the fridge, and it flipped upside down. Outstretched arms and accessories made the tops of the characters much heavier than the bottoms. We had to redistribute weight inside the models, and the character with a heavy megaphone needed two magnets for balance. We also abandoned the flat base because it made attaching the figure to a fridge awkward.

Preparing for production in batches was a separate challenge. The first models printed well individually but did not work for a large batch on one build plate. We had to adjust overhanging details on the hats, level the middle sections of seated models and change rings on the bodies. One successful prototype did not mean that the model was ready for a production run.

The chain loop needed more work too. It was fragile, and by the twentieth version we made it much thicker to resist breaking in children's hands. We spent a long time finding the right magnet cavity size, testing shrinkage settings from minus 0.5% to minus 0.05%. The magnet had to fit snugly and stay in place during the printing pause.

Another unexpected problem was material consumption. Printing one figure weighing 20 grams produced around 60 grams of plastic waste. The printer had to change colour on every layer, for example when a hat was slightly tilted. We levelled some details horizontally to reduce the number of colour changes within each layer. The character looked the same, but the plastic savings were substantial. We initially planned to put the Amijami logo on the bottom, but eventually fitted it onto the figure's belt and printed it in contrasting white.

After dozens of test prints, we approved the final models of six characters, each no taller than 4.5 centimetres. These figures are now included in Amijami Sushi children's meal combos. It was a demanding but fascinating project that showed how many details go into a simple plastic figure. On Friday, I will try to make a video showing the whole journey from illustration to finished character. I think seeing the problems and the changes we made will be interesting too.

See Decords in Action