{"title":"3D Printed Pet Furniture \u0026 Feeding Accessories","description":"\u003cp\u003eExplore physical 3D printed pet furniture and feeding accessories, including wall-mounted cat beds, floating cat caves, pet bowl holders, raised feeding stands, bowls and small-animal hideouts. These products differ in dimensions, material, mounting, included parts and intended animal size. Review the complete product specification before choosing an item for a pet.\u003c\/p\u003e\n\u003ch2\u003eChoose by function\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWall cat beds and caves:\u003c\/strong\u003e elevated resting spaces that keep floor area clear and create a dedicated perch.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePet bowl holders and feeding stands:\u003c\/strong\u003e frames designed to position compatible bowls at a stated height or on a wall.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePet bowls:\u003c\/strong\u003e printed feeding dishes whose intended contents, cleaning method and dimensions must be checked individually.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSmall-animal hideouts:\u003c\/strong\u003e enclosed decorative shelters intended only for animals and uses identified on the product page.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eMeasure the pet and installation area\u003c\/h2\u003e\n\u003cp\u003eCompare the product's full width, height and depth with the pet's body size and normal resting or feeding posture. For beds and caves, check the usable internal opening and resting surface, not only the exterior dimensions. For bowl holders, confirm the bowl diameter, rim shape and height. Product photographs illustrate the design but should not be treated as an exact scale reference.\u003c\/p\u003e\n\u003ch2\u003eSecure wall-mounted furniture correctly\u003c\/h2\u003e\n\u003cp\u003eWall-mounted pet furniture carries a moving load, so the wall construction, fixings and installation quality are critical. Use fixings rated for the actual wall and expected dynamic load. Mounting hardware may not be included. Install into a suitable structural surface, test the empty product, increase load gradually and inspect the mounting regularly. Stop use immediately if movement, cracking or wall damage appears.\u003c\/p\u003e\n\u003ch2\u003eCheck bowls and feeding use\u003c\/h2\u003e\n\u003cp\u003eDo not assume that a separate bowl is included with every holder. Confirm the supplied parts and compatible bowl size. A decorative printed holder is not automatically suitable for direct food or water contact. When the product uses a removable bowl, follow the bowl manufacturer's cleaning instructions. Do not place a printed part in a dishwasher or expose it to hot liquids unless the exact listing permits it.\u003c\/p\u003e\n\u003ch2\u003eMaterial, heat and cleaning\u003c\/h2\u003e\n\u003cp\u003e3D printed products are made layer by layer, so fine layer lines and small surface variations can be normal. Material properties vary by item. Keep products away from open flame, heaters, excessive heat and unapproved outdoor exposure. Clean only by the method stated on the product page and inspect pet-accessible edges and surfaces regularly.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eIs a pet bowl included with every holder?\u003c\/h3\u003e\n\u003cp\u003eNo. Included parts vary. Check the individual listing for the compatible bowl dimensions and supplied components.\u003c\/p\u003e\n\u003ch3\u003eWill one wall bed fit every cat?\u003c\/h3\u003e\n\u003cp\u003eNo. Compare the usable internal dimensions, opening and stated load guidance with the individual pet before ordering.\u003c\/p\u003e\n\u003ch3\u003eIs mounting hardware included?\u003c\/h3\u003e\n\u003cp\u003eNot necessarily. Select fixings for the wall construction and expected moving load, and use professional installation when the substrate is uncertain.\u003c\/p\u003e\n\u003ch3\u003eCan these products be used outdoors or washed in a dishwasher?\u003c\/h3\u003e\n\u003cp\u003eOnly when the exact product specification explicitly permits that use.\u003c\/p\u003e\n\u003cp\u003eBrowse all \u003ca href=\"\/collections\/unique-3d-printed-home-decor-products-gifts\"\u003e3D printed products and gifts\u003c\/a\u003e for additional decorative and functional designs.\u003c\/p\u003e","products":[{"product_id":"3d-printed-dog-bowl-modern-pet-food-dish-17549","title":"3D Printed Dog Bowl | Raised Paw Print Feeding Dish","description":"\u003cp\u003eA 3D printed pet bowl with a raised paw-print detail for dogs or cats.\u003c\/p\u003e\u003ch2\u003eDesign and available sizes\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eRaised paw-print feature with a rounded modern profile\u003c\/li\u003e\n\u003cli\u003eLightweight 3D printed PLA construction\u003c\/li\u003e\n\u003cli\u003eChoose Small 6 inches, Medium 7 inches, Large 8 inches, XL 9 inches, or XXL 10 inches\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFood and water use\u003c\/h2\u003e\u003cp\u003eThe listing does not state a certified food-contact standard. For wet food or water, use a compatible removable food-grade liner or insert. For dry food, inspect the surface regularly and discontinue use if it becomes cracked, deeply scratched, or difficult to clean.\u003c\/p\u003e\u003ch2\u003eCleaning\u003c\/h2\u003e\u003cp\u003eHand wash with mild soap and cool or lukewarm water, then dry completely. Do not use a dishwasher, boiling water, or high heat.\u003c\/p\u003e\u003ch2\u003eWhat is included\u003c\/h2\u003e\u003cp\u003eOne 3D printed pet bowl in the selected size and color is included. Food, liners, and styling props are not included.\u003c\/p\u003e\u003ch2\u003e3D printed finish\u003c\/h2\u003e\u003cp\u003eFine layer lines can be visible at close range and are a normal characteristic of 3D printing. Color can vary slightly because of lighting, photography, filament batches, and screen settings.\u003c\/p\u003e\u003ch2\u003eProduction and delivery\u003c\/h2\u003e\u003cp\u003eProduction normally takes 1–3 business days. Free worldwide standard shipping is included.\u003c\/p\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003ch3\u003eCan the bowl go in a dishwasher?\u003c\/h3\u003e\u003cp\u003eNo. Hand wash it and keep it away from high heat.\u003c\/p\u003e\u003ch3\u003eCan it hold wet food or water?\u003c\/h3\u003e\u003cp\u003eUse a compatible removable food-grade liner or insert because no certified food-contact standard is stated.\u003c\/p\u003e\u003ch3\u003eHow do I choose a size?\u003c\/h3\u003e\u003cp\u003eCompare the listed outside width and height with the space available and your pet’s feeding needs.\u003c\/p\u003e","brand":"Decords","offers":[{"title":"Small (6 inches)","offer_id":50303739887954,"sku":"PRE-3DPRI-SMA-K42I","price":13.88,"currency_code":"USD","in_stock":true},{"title":"Medium (7 inches)","offer_id":50303739920722,"sku":"PRE-3DPRI-MED-K42I","price":18.88,"currency_code":"USD","in_stock":true},{"title":"Large (8 inches)","offer_id":50303739953490,"sku":"PRE-3DPRI-LAR-K42I","price":22.77,"currency_code":"USD","in_stock":true},{"title":"XL (9 inches)","offer_id":50303739986258,"sku":"PRE-3DPRI-XL9-K42I","price":27.77,"currency_code":"USD","in_stock":true},{"title":"XXL (10 inches)","offer_id":50303740019026,"sku":"PRE-3DPRI-XXL-K42I","price":32.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0608\/0888\/8570\/files\/il_fullxfull.6705147787_jvzv.jpg?v=1739963017"},{"product_id":"3d-printed-dog-bowl-modern-pet-dish-16483","title":"3D Printed Dog Bowl | Minimalist Pet Feeding Dish","description":"\u003cp\u003eA minimalist 3D printed pet bowl with a simple rounded profile for dogs or cats.\u003c\/p\u003e\u003ch2\u003eDesign and available sizes\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eClean exterior shape for a modern feeding area\u003c\/li\u003e\n\u003cli\u003eLightweight 3D printed PLA construction\u003c\/li\u003e\n\u003cli\u003eChoose Small 6 inches, Medium 7 inches, Large 8 inches, XL 9 inches, or XXL 10 inches\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFood and water use\u003c\/h2\u003e\u003cp\u003eThe listing does not state a certified food-contact standard. For wet food or water, use a compatible removable food-grade liner or insert. For dry food, inspect the surface regularly and discontinue use if it becomes cracked, deeply scratched, or difficult to clean.\u003c\/p\u003e\u003ch2\u003eCleaning\u003c\/h2\u003e\u003cp\u003eHand wash with mild soap and cool or lukewarm water, then dry completely. Do not use a dishwasher, boiling water, or high heat.\u003c\/p\u003e\u003ch2\u003eWhat is included\u003c\/h2\u003e\u003cp\u003eOne 3D printed pet bowl in the selected size and color is included. Food, liners, and styling props are not included.\u003c\/p\u003e\u003ch2\u003e3D printed finish\u003c\/h2\u003e\u003cp\u003eFine layer lines can be visible at close range and are a normal characteristic of 3D printing. Color can vary slightly because of lighting, photography, filament batches, and screen settings.\u003c\/p\u003e\u003ch2\u003eProduction and delivery\u003c\/h2\u003e\u003cp\u003eProduction normally takes 1–3 business days. Free worldwide standard shipping is included.\u003c\/p\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003ch3\u003eCan the bowl go in a dishwasher?\u003c\/h3\u003e\u003cp\u003eNo. Hand wash it and keep it away from high heat.\u003c\/p\u003e\u003ch3\u003eCan it hold wet food or water?\u003c\/h3\u003e\u003cp\u003eUse a compatible removable food-grade liner or insert because no certified food-contact standard is stated.\u003c\/p\u003e\u003ch3\u003eHow do I choose a size?\u003c\/h3\u003e\u003cp\u003eCompare the listed outside width and height with the space available and your pet’s feeding needs.\u003c\/p\u003e","brand":"Decords","offers":[{"title":"Small (6 inches)","offer_id":50303740051794,"sku":"PRE-3DPRI-SMA-L42I","price":13.88,"currency_code":"USD","in_stock":true},{"title":"Medium (7 inches)","offer_id":50303740084562,"sku":"PRE-3DPRI-MED-L42I","price":18.88,"currency_code":"USD","in_stock":true},{"title":"Large (8 inches)","offer_id":50303740117330,"sku":"PRE-3DPRI-LAR-L42I","price":22.77,"currency_code":"USD","in_stock":true},{"title":"XL (9 inches)","offer_id":50303740150098,"sku":"PRE-3DPRI-XL9-L42I","price":27.77,"currency_code":"USD","in_stock":true},{"title":"XXL (10 inches)","offer_id":50303740182866,"sku":"PRE-3DPRI-XXL-L42I","price":32.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0608\/0888\/8570\/files\/il_fullxfull.6657075382_l4o3.jpg?v=1739963016"},{"product_id":"3d-printed-cat-bowl-cute-kitty-food-dish-19911","title":"3D Printed Cat-Shaped Pet Bowl","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\u003cp\u003eThe 3D Printed Cat-Shaped Pet Bowl is a cat-shaped shallow pet bowl designed for cats and small-pet feeding setups. This page explains the material, options, included parts and practical limitations so the product can be evaluated before ordering.\u003c\/p\u003e\u003ch2\u003eMaterials and finish\u003c\/h2\u003e\u003cp\u003eThis cat-shaped shallow pet bowl is produced layer by layer in PLA plastic. Fine layer lines and small surface variations are normal characteristics of 3D printing. Color can vary slightly with lighting and screen settings.\u003c\/p\u003e\u003ch2\u003eSize and ordering\u003c\/h2\u003e\u003cp\u003eChoose the listed bowl size and available color. Container dimensions and pet needs vary, so compare the selected option with the animal’s normal feeding setup before ordering.\u003c\/p\u003e\u003ch2\u003eFood use and care\u003c\/h2\u003e\u003cp\u003eIndependent food-contact certification is not specified. For food or water, place a removable certified insert or liner inside rather than using the printed PLA surface directly. Wash the insert separately. Wipe the printed cover by hand with mild soap and cool or lukewarm water; do not soak, dishwash or expose it to high heat. Inspect regularly and stop using it if damaged.\u003c\/p\u003e\u003ch2\u003eWhat is included\u003c\/h2\u003e\u003cp\u003eOne cat-shaped printed bowl body in the selected size and color. Food, water and a certified removable insert are not included.\u003c\/p\u003e\u003ch2\u003eProduction and delivery\u003c\/h2\u003e\u003cp\u003eProduction takes 1–3 business days. Free worldwide standard shipping is included.\u003c\/p\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003ch3\u003eCan food touch the PLA directly?\u003c\/h3\u003e\u003cp\u003eFood-contact certification is not specified, so use a removable certified insert or liner.\u003c\/p\u003e\u003ch3\u003eIs it dishwasher safe?\u003c\/h3\u003e\u003cp\u003eNo. Wipe the printed part gently by hand.\u003c\/p\u003e\u003ch3\u003eHow do I choose a size?\u003c\/h3\u003e\u003cp\u003eCompare the listed option with the pet’s current bowl and feeding needs.\u003c\/p\u003e","brand":"Decords","offers":[{"title":"X-Small (4 inches)","offer_id":50303841075538,"sku":"PRE-3DPRI-XSM-BI2I","price":11.87,"currency_code":"USD","in_stock":true},{"title":"Small (6 inches)","offer_id":50303841108306,"sku":"PRE-3DPRI-SMA-BI2I","price":13.88,"currency_code":"USD","in_stock":true},{"title":"Medium (7 inches)","offer_id":50303841141074,"sku":"PRE-3DPRI-MED-BI2I","price":18.88,"currency_code":"USD","in_stock":true},{"title":"Large (8 inches)","offer_id":50303841173842,"sku":"PRE-3DPRI-LAR-BI2I","price":22.77,"currency_code":"USD","in_stock":true},{"title":"XL (9 inches)","offer_id":50303841206610,"sku":"PRE-3DPRI-XL9-BI2I","price":27.77,"currency_code":"USD","in_stock":true},{"title":"XXL (10 inches)","offer_id":50303841239378,"sku":"PRE-3DPRI-XXL-BI2I","price":32.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0608\/0888\/8570\/files\/il_fullxfull.6705163985_67mk.jpg?v=1739963620"},{"product_id":"3d-printed-cat-bowl-cute-kitty-food-18811","title":"3D Printed Cat Bowl | Shallow Kitty Feeding Dish","description":"\u003cp\u003eA shallow cat-shaped 3D printed feeding dish with a minimalist face detail for cats and small pets.\u003c\/p\u003e\u003ch2\u003eDesign and available sizes\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eShallow profile intended to reduce contact with a cat’s whiskers\u003c\/li\u003e\n\u003cli\u003eLightweight 3D printed PLA construction\u003c\/li\u003e\n\u003cli\u003eChoose X-Small 4 inches, Small 6 inches, Medium 7 inches, Large 8 inches, XL 9 inches, or XXL 10 inches\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFood and water use\u003c\/h2\u003e\u003cp\u003eThe listing does not state a certified food-contact standard. For wet food or water, use a compatible removable food-grade liner or insert. For dry food, inspect the surface regularly and discontinue use if it becomes cracked, deeply scratched, or difficult to clean.\u003c\/p\u003e\u003ch2\u003eCleaning\u003c\/h2\u003e\u003cp\u003eHand wash with mild soap and cool or lukewarm water, then dry completely. Do not use a dishwasher, boiling water, or high heat.\u003c\/p\u003e\u003ch2\u003eWhat is included\u003c\/h2\u003e\u003cp\u003eOne 3D printed pet bowl in the selected size and color is included. Food, liners, and styling props are not included.\u003c\/p\u003e\u003ch2\u003e3D printed finish\u003c\/h2\u003e\u003cp\u003eFine layer lines can be visible at close range and are a normal characteristic of 3D printing. Color can vary slightly because of lighting, photography, filament batches, and screen settings.\u003c\/p\u003e\u003ch2\u003eProduction and delivery\u003c\/h2\u003e\u003cp\u003eProduction normally takes 1–3 business days. Free worldwide standard shipping is included.\u003c\/p\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003ch3\u003eCan the bowl go in a dishwasher?\u003c\/h3\u003e\u003cp\u003eNo. Hand wash it and keep it away from high heat.\u003c\/p\u003e\u003ch3\u003eCan it hold wet food or water?\u003c\/h3\u003e\u003cp\u003eUse a compatible removable food-grade liner or insert because no certified food-contact standard is stated.\u003c\/p\u003e\u003ch3\u003eHow do I choose a size?\u003c\/h3\u003e\u003cp\u003eCompare the listed outside width and height with the space available and your pet’s feeding needs.\u003c\/p\u003e","brand":"Decords","offers":[{"title":"X-Small (4 inches)","offer_id":50303840780626,"sku":"PRE-3DPRI-XSM-CI2I","price":11.87,"currency_code":"USD","in_stock":true},{"title":"Small (6 inches)","offer_id":50303840813394,"sku":"PRE-3DPRI-SMA-CI2I","price":13.88,"currency_code":"USD","in_stock":true},{"title":"Medium (7 inches)","offer_id":50303840846162,"sku":"PRE-3DPRI-MED-CI2I","price":18.88,"currency_code":"USD","in_stock":true},{"title":"Large (8 inches)","offer_id":50303840878930,"sku":"PRE-3DPRI-LAR-CI2I","price":22.77,"currency_code":"USD","in_stock":true},{"title":"XL (9 inches)","offer_id":50303840911698,"sku":"PRE-3DPRI-XL9-CI2I","price":27.77,"currency_code":"USD","in_stock":true},{"title":"XXL (10 inches)","offer_id":50303840944466,"sku":"PRE-3DPRI-XXL-CI2I","price":32.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0608\/0888\/8570\/files\/il_fullxfull.6657114152_ps8y.jpg?v=1739963617"},{"product_id":"3d-printed-cat-ear-wall-bed","title":"3D Printed Cat Ear Wall Bed | Floating Bowl Perch","description":"\u003cp\u003eCreate an elevated indoor resting place with this 3D printed wall-mounted cat bed. Its rounded bowl platform and cat-ear backrest form a compact floating perch.\u003c\/p\u003e\u003ch2\u003eSize and fit\u003c\/h2\u003e\u003cp\u003eSelect an exterior size from 18 to 26 inches. The listed size does not equal the usable resting area and does not guarantee suitability for a particular breed or weight. Contact Decords for usable dimensions and compare them with the cat's body length and normal resting position before ordering.\u003c\/p\u003e\u003ch2\u003eChoose your color\u003c\/h2\u003e\u003cp\u003eChoose the size in the standard product options and use the color selector on the page for the print color. If you prefer another available PLA color, place the order and send us the order number with the requested color, or contact us before ordering. We confirm material availability before production. Screen settings, lighting and filament batches can cause slight shade variation.\u003c\/p\u003e\u003ch2\u003eInstallation and safety\u003c\/h2\u003e\u003cp\u003eMounting hardware is not included. Professional, load-appropriate installation is recommended. Select fixings for the wall construction, product size, cat weight and dynamic force created by jumping. No universal load rating is stated. Test the installation before access, inspect it regularly and stop use if the product, wall or fixings show movement, cracks, deformation or chewing damage.\u003c\/p\u003e\u003ch2\u003e3D printed finish and care\u003c\/h2\u003e\u003cp\u003eThe bed is made from PLA plastic. Fine layer lines and small surface variations are normal. Keep it indoors and away from high heat, open flames and prolonged direct sunlight. Clean gently with a soft dry or slightly damp cloth.\u003c\/p\u003e\u003ch2\u003eWhat is included\u003c\/h2\u003e\u003cp\u003eOne 3D printed cat-ear wall bed in the selected exterior size and color. Mounting hardware, cushion, cat and photo props are not included.\u003c\/p\u003e\u003ch2\u003eProduction and delivery\u003c\/h2\u003e\u003cp\u003eThis item is produced to order. Current delivery methods and estimated times are shown at checkout and in the \u003ca href=\"\/pages\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e.\u003c\/p\u003e","brand":"Decords","offers":[{"title":"18 inches (45 cm)","offer_id":52967983841618,"sku":null,"price":138.0,"currency_code":"USD","in_stock":true},{"title":"20 inches (50 cm)","offer_id":52967983874386,"sku":null,"price":158.0,"currency_code":"USD","in_stock":true},{"title":"22 inches (55 cm)","offer_id":52967983907154,"sku":null,"price":198.0,"currency_code":"USD","in_stock":true},{"title":"24 inches (60 cm)","offer_id":52967983939922,"sku":null,"price":246.0,"currency_code":"USD","in_stock":true},{"title":"26 inches (65 cm)","offer_id":52967983972690,"sku":null,"price":277.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0608\/0888\/8570\/files\/il_fullxfull.7618335056_8acj.jpg?v=1774027136"},{"product_id":"3d-printed-sculptural-cat-wall-bed","title":"3D Printed Sculptural Cat Wall Bed","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\u003cp\u003eA wall-mounted cat resting bed with a rounded bowl and a curved sculptural backrest. It provides an elevated indoor place for a cat to sit or rest.\u003c\/p\u003e\u003ch2\u003eMaterials and finish\u003c\/h2\u003e\u003cp\u003eMade from PLA plastic using layer-by-layer 3D printing. Fine layer lines and small surface variations are normal. Colour may look slightly different under different lighting or screen settings.\u003c\/p\u003e\u003ch2\u003eSize\u003c\/h2\u003e\u003cp\u003eThe selected option is the longest exterior dimension of the complete bed. Available sizes are 18, 20, 22, 24 and 26 inches. Compare the chosen size with the cat’s resting posture and the available wall area.\u003c\/p\u003e\u003ch2\u003eInstallation and safety\u003c\/h2\u003e\u003cp\u003eMounting hardware is not included. No universal load rating is provided. Select wall fixings for the wall construction, product size, pet weight and dynamic movement. Test the installation before use and inspect it regularly.\u003c\/p\u003e\u003ch2\u003eCare\u003c\/h2\u003e\u003cp\u003eWipe with a soft dry or slightly damp cloth. Keep PLA away from sustained heat. Stop use if the product, wall or fixings show damage or movement.\u003c\/p\u003e\u003ch2\u003eWhat is included\u003c\/h2\u003e\u003cp\u003eOne 3D printed cat wall bed. Mounting hardware, cushion, pet and styling props are not included.\u003c\/p\u003e\u003ch2\u003eProduction and delivery\u003c\/h2\u003e\u003cp\u003eProduction normally takes 1–3 business days. Free worldwide standard shipping is included.\u003c\/p\u003e","brand":"Decords","offers":[{"title":"18 inches (45 cm)","offer_id":52967984365906,"sku":null,"price":138.0,"currency_code":"USD","in_stock":true},{"title":"20 inches (50 cm)","offer_id":52967984398674,"sku":null,"price":158.0,"currency_code":"USD","in_stock":true},{"title":"22 inches (55 cm)","offer_id":52967984431442,"sku":null,"price":198.0,"currency_code":"USD","in_stock":true},{"title":"24 inches (60 cm)","offer_id":52967984464210,"sku":null,"price":246.0,"currency_code":"USD","in_stock":true},{"title":"26 inches (65 cm)","offer_id":52967984496978,"sku":null,"price":277.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0608\/0888\/8570\/files\/il_fullxfull.7618325858_l4qo_40de752c-57d4-45b4-8d8b-c0fe0ec6eb44.jpg?v=1774027143"},{"product_id":"3d-printed-curved-cat-wall-bed","title":"3D Printed Curved Cat Wall Bed | Floating Pet Perch","description":"\u003cp\u003eGive a cat an elevated indoor resting platform with this 3D printed curved wall bed. The wide platform has raised edges for a defined lounging area.\u003c\/p\u003e\u003ch2\u003eSize and fit\u003c\/h2\u003e\u003cp\u003eSelect an exterior size from 18 to 26 inches. The listed size does not equal the usable resting area and does not guarantee suitability for a particular breed or weight. Contact Decords for usable dimensions and compare them with the cat's body length and normal resting position before ordering.\u003c\/p\u003e\u003ch2\u003eChoose your color\u003c\/h2\u003e\u003cp\u003eChoose the size in the standard product options and use the color selector on the page for the print color. If you prefer another available PLA color, place the order and send us the order number with the requested color, or contact us before ordering. We confirm material availability before production. Screen settings, lighting and filament batches can cause slight shade variation.\u003c\/p\u003e\u003ch2\u003eInstallation and safety\u003c\/h2\u003e\u003cp\u003eMounting hardware is not included. Professional, load-appropriate installation is recommended. Select fixings for the wall construction, product size, cat weight and dynamic force created by jumping. No universal load rating is stated. Test the installation before access, inspect it regularly and stop use if the product, wall or fixings show movement, cracks, deformation or chewing damage.\u003c\/p\u003e\u003ch2\u003e3D printed finish and care\u003c\/h2\u003e\u003cp\u003eThe bed is made from PLA plastic. Fine layer lines and small surface variations are normal. Keep it indoors and away from high heat, open flames and prolonged direct sunlight. Clean gently with a soft dry or slightly damp cloth.\u003c\/p\u003e\u003ch2\u003eWhat is included\u003c\/h2\u003e\u003cp\u003eOne 3D printed curved cat wall bed in the selected exterior size and color. Mounting hardware, cushion, cat and photo props are not included.\u003c\/p\u003e\u003ch2\u003eProduction and delivery\u003c\/h2\u003e\u003cp\u003eThis item is produced to order. Current delivery methods and estimated times are shown at checkout and in the \u003ca href=\"\/pages\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e.\u003c\/p\u003e","brand":"Decords","offers":[{"title":"18 inches (45 cm)","offer_id":52967988920658,"sku":null,"price":138.0,"currency_code":"USD","in_stock":true},{"title":"20 inches (50 cm)","offer_id":52967988953426,"sku":null,"price":158.0,"currency_code":"USD","in_stock":true},{"title":"22 inches (55 cm)","offer_id":52967988986194,"sku":null,"price":198.0,"currency_code":"USD","in_stock":true},{"title":"24 inches (60 cm)","offer_id":52967989018962,"sku":null,"price":246.0,"currency_code":"USD","in_stock":true},{"title":"26 inches (65 cm)","offer_id":52967989051730,"sku":null,"price":277.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0608\/0888\/8570\/files\/il_fullxfull.7666262035_o2ou.jpg?v=1774027148"},{"product_id":"wall-mounted-horned-cat-shelf-bed-3d-71675","title":"3D Printed Horned Cat Wall Shelf Bed","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\u003cp\u003e3D Printed Horned Cat Wall Shelf Bed is wall-mounted pet furniture with a rounded resting bowl with horn-shaped details. It gives a cat an elevated place to sit or rest while keeping the structure visually integrated with the room.\u003c\/p\u003e\u003ch2\u003eMaterials and finish\u003c\/h2\u003e\u003cp\u003eMade from PLA plastic using layer-by-layer 3D printing. Fine layer lines and small surface variations are normal. Colour can look slightly different under different lighting or on different screens.\u003c\/p\u003e\u003ch2\u003eSize and ordering\u003c\/h2\u003e\u003cp\u003eAvailable options are 18 inches (45 cm), 20 inches (50 cm), 22 inches (55 cm), 24 inches (60 cm), 26 inches (65 cm). Choose according to the cat’s body length, resting position and available wall space; the size label alone does not confirm suitability for a particular breed or weight.\u003c\/p\u003e\u003ch2\u003eInstallation and safety\u003c\/h2\u003e\u003cp\u003eMounting hardware is not included. No universal load rating is stated, so the wall, fasteners and installation must be assessed for the cat’s weight and movement. Use a qualified installer when uncertain, test the installation before access and inspect it regularly.\u003c\/p\u003e\u003ch2\u003eCare\u003c\/h2\u003e\u003cp\u003eWipe the PLA surface with a soft dry or slightly damp cloth. Keep it away from sustained heat and replace the product or fixings if damage or movement appears.\u003c\/p\u003e\u003ch2\u003eWhat is included\u003c\/h2\u003e\u003cp\u003eOne 3D printed cat wall shelf bed. Mounting hardware, cushions, cats and styling props are not included unless an option explicitly states otherwise.\u003c\/p\u003e\u003ch2\u003eProduction and delivery\u003c\/h2\u003e\u003cp\u003eProduction normally takes 1–3 business days. Free worldwide standard shipping is included.\u003c\/p\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003ch3\u003eWhich size should I choose?\u003c\/h3\u003e\u003cp\u003eCompare the listed length with the cat’s resting posture and the available wall area.\u003c\/p\u003e\u003ch3\u003eIs there a stated weight limit?\u003c\/h3\u003e\u003cp\u003eNo universal load rating is provided. Installation strength depends on the wall, fixings, product size and dynamic pet movement.\u003c\/p\u003e\u003ch3\u003eAre mounting fixings included?\u003c\/h3\u003e\u003cp\u003eNo. Select and install fixings suitable for the wall construction and expected load.\u003c\/p\u003e\u003ch3\u003eIs a cushion included?\u003c\/h3\u003e\u003cp\u003eNo cushion is listed as included.\u003c\/p\u003e","brand":"Decords","offers":[{"title":"18 inches (45 cm)","offer_id":52955735982418,"sku":null,"price":138.0,"currency_code":"USD","in_stock":true},{"title":"20 inches (50 cm)","offer_id":52955736506706,"sku":null,"price":158.0,"currency_code":"USD","in_stock":true},{"title":"22 inches (55 cm)","offer_id":52955737030994,"sku":null,"price":198.0,"currency_code":"USD","in_stock":true},{"title":"24 inches (60 cm)","offer_id":52955737555282,"sku":null,"price":246.0,"currency_code":"USD","in_stock":true},{"title":"26 inches (65 cm)","offer_id":52955738079570,"sku":null,"price":277.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0608\/0888\/8570\/files\/il_fullxfull.7618342918_hzwx.jpg?v=1774024765"},{"product_id":"3d-printed-minimal-cat-wall-bed","title":"3D Printed Minimal Cat Wall Bed | Curved Floating Perch","description":"\u003cp\u003eCreate an elevated resting place with this 3D printed minimal cat wall bed. The gently curved open platform forms a floating perch while keeping the floor area clear.\u003c\/p\u003e\u003ch2\u003eProduct details\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eOne physical 3D printed wall-mounted cat bed\u003c\/li\u003e\n\u003cli\u003eOpen curved resting platform\u003c\/li\u003e\n\u003cli\u003ePLA plastic construction\u003c\/li\u003e\n\u003cli\u003eAvailable in exterior sizes from 18 to 26 inches\u003c\/li\u003e\n\u003cli\u003eMounting hardware, cushion, cat and photo props are not included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCheck the sleeping area\u003c\/h2\u003e\u003cp\u003eThe option label gives the exterior size of the complete bed. It does not confirm the internal sleeping dimensions or suitability for a particular breed. Contact Decords for the usable platform measurements and compare them with the cat's body length and resting position before ordering.\u003c\/p\u003e\u003ch2\u003eInstallation and load\u003c\/h2\u003e\u003cp\u003eProfessional, load-appropriate installation is recommended. Select screws and anchors for the wall material, bed size, cat weight and dynamic force from jumping. No universal load rating is stated. Do not install above hazards, and inspect the bed and fixings regularly.\u003c\/p\u003e\u003ch2\u003ePet-use guidance\u003c\/h2\u003e\u003cp\u003eIntroduce the bed under supervision. Remove it immediately if cracks, deformation, loose fixings, sharp edges or chewing damage appear. PLA is not chew-proof and the bed is not a toy.\u003c\/p\u003e\u003ch2\u003e3D printed finish and care\u003c\/h2\u003e\u003cp\u003eFine layer lines and small surface variations are normal characteristics of 3D printing. Use indoors, clean gently and keep the bed away from high heat, open flames and prolonged direct sunlight.\u003c\/p\u003e\u003ch2\u003eProduction and delivery\u003c\/h2\u003e\u003cp\u003eThis item is produced to order. Current delivery methods and estimated times are shown at checkout and in the \u003ca href=\"\/pages\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e.\u003c\/p\u003e","brand":"Decords","offers":[{"title":"18 inches (45 cm)","offer_id":52967989576018,"sku":null,"price":138.0,"currency_code":"USD","in_stock":true},{"title":"20 inches (50 cm)","offer_id":52967989608786,"sku":null,"price":158.0,"currency_code":"USD","in_stock":true},{"title":"22 inches (55 cm)","offer_id":52967989641554,"sku":null,"price":198.0,"currency_code":"USD","in_stock":true},{"title":"24 inches (60 cm)","offer_id":52967989674322,"sku":null,"price":246.0,"currency_code":"USD","in_stock":true},{"title":"26 inches (65 cm)","offer_id":52967989707090,"sku":null,"price":277.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0608\/0888\/8570\/files\/il_fullxfull.7666213013_mllp.jpg?v=1774027154"},{"product_id":"3d-printed-bunny-wall-cat-cave","title":"3D Printed Bunny Wall Cat Cave | Floating Pet Bed","description":"\u003cp\u003eThis 3D printed wall-mounted cat cave uses a rounded bunny-shaped enclosure with long ears to create an elevated resting place while keeping floor space clear.\u003c\/p\u003e\u003ch2\u003eSize and fit\u003c\/h2\u003e\u003cp\u003eChoose an exterior size from 18 to 26 inches. The listed value is an outside measurement and does not equal the usable interior sleeping area. Request the opening and interior dimensions before ordering, then compare them with the cat's body length and preferred resting position. Fit cannot be guaranteed by breed alone.\u003c\/p\u003e\u003ch2\u003eChoose the color\u003c\/h2\u003e\u003cp\u003eUse the 3D product color selector on this page to preview and choose an available print color. You can also place the order first and send the preferred color with the order number after purchase. Other available PLA colors can usually be produced on request, subject to material availability. Screen previews are approximate, and the finished shade can vary slightly between displays and production batches.\u003c\/p\u003e\u003ch2\u003eInstallation and safety\u003c\/h2\u003e\u003cp\u003eProfessional, load-appropriate installation is essential. Select screws and anchors for the wall construction, product size, cat weight and dynamic force from jumping. Mounting hardware is not included, and no universal load rating is stated. Test the installation before use and inspect it regularly. Remove the cave if cracks, deformation, movement or chewing damage appears.\u003c\/p\u003e\u003ch2\u003eCare\u003c\/h2\u003e\u003cp\u003eKeep PLA indoors and away from high heat, open flame and prolonged direct sunlight. Wipe gently with a soft dry or slightly damp cloth.\u003c\/p\u003e\u003ch2\u003eWhat is included\u003c\/h2\u003e\u003cp\u003eOne physical 3D printed bunny wall cat cave in the selected size and color. Mounting hardware, cushion, cat and photo props are not included.\u003c\/p\u003e\u003ch2\u003eProduction and delivery\u003c\/h2\u003e\u003cp\u003eThis item is produced to order. Current delivery methods and estimated times are shown at checkout and in the \u003ca href=\"\/pages\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e.\u003c\/p\u003e","brand":"Decords","offers":[{"title":"18 inches (45 cm)","offer_id":52736222069074,"sku":null,"price":138.0,"currency_code":"USD","in_stock":true},{"title":"20 inches (50 cm)","offer_id":52736222101842,"sku":null,"price":158.0,"currency_code":"USD","in_stock":true},{"title":"22 inches (55 cm)","offer_id":52736222134610,"sku":null,"price":198.0,"currency_code":"USD","in_stock":true},{"title":"24 inches (60 cm)","offer_id":52736222167378,"sku":null,"price":246.0,"currency_code":"USD","in_stock":true},{"title":"26 inches (65 cm)","offer_id":52736222200146,"sku":null,"price":277.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0608\/0888\/8570\/files\/il_fullxfull.7724725196_nbzl_e1097e3b-727f-47f8-9ef0-568bd4a6de60.jpg?v=1774026180"},{"product_id":"3d-printed-crown-wall-cat-bed","title":"3D Printed Crown Wall Cat Bed | Kawaii Floating Lounger","description":"\u003cp\u003eCreate an elevated resting place for a compatible cat with this 3D printed crown-shaped wall lounger. The open curved form keeps the sleeping area visible while freeing floor space.\u003c\/p\u003e\u003ch2\u003eProduct details\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eOne physical 3D printed wall-mounted cat bed\u003c\/li\u003e\n\u003cli\u003eCrown-shaped open lounger\u003c\/li\u003e\n\u003cli\u003ePLA plastic construction\u003c\/li\u003e\n\u003cli\u003eAvailable in exterior sizes from 18 to 26 inches\u003c\/li\u003e\n\u003cli\u003eMounting hardware, cushion and photo props are not included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCheck the fit before ordering\u003c\/h2\u003e\u003cp\u003eThe option label gives the longest exterior dimension, not the internal sleeping area. Fit cannot be guaranteed by breed or body weight alone. Request the internal dimensions and compare them with your cat before ordering.\u003c\/p\u003e\u003ch2\u003eInstallation and safety\u003c\/h2\u003e\u003cp\u003eProfessional, load-appropriate installation is strongly recommended. Use screws and wall anchors selected for the wall construction, bed size, cat weight and dynamic movement. No universal weight rating is provided. Inspect the bed and mounting before use and regularly afterward. Introduce the product under supervision. Remove it immediately if the PLA is cracked, deformed, loose or being chewed.\u003c\/p\u003e\u003ch2\u003e3D printed finish and care\u003c\/h2\u003e\u003cp\u003eFine layer lines and small surface variations are normal characteristics of 3D printing. Keep PLA away from high heat, open flames and prolonged direct sunlight. Clean with a soft cloth and lukewarm water, then dry completely.\u003c\/p\u003e\u003ch2\u003eProduction and delivery\u003c\/h2\u003e\u003cp\u003eThis item is produced to order. Current delivery methods and estimated times are shown at checkout and in the \u003ca href=\"\/pages\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e.\u003c\/p\u003e","brand":"Decords","offers":[{"title":"18 inches (45 cm)","offer_id":52736222265682,"sku":null,"price":138.0,"currency_code":"USD","in_stock":true},{"title":"20 inches (50 cm)","offer_id":52736222298450,"sku":null,"price":158.0,"currency_code":"USD","in_stock":true},{"title":"22 inches (55 cm)","offer_id":52736222331218,"sku":null,"price":198.0,"currency_code":"USD","in_stock":true},{"title":"24 inches (60 cm)","offer_id":52736222363986,"sku":null,"price":246.0,"currency_code":"USD","in_stock":true},{"title":"26 inches (65 cm)","offer_id":52736222396754,"sku":null,"price":277.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0608\/0888\/8570\/files\/il_fullxfull.7772667247_ahu4_42811a33-eb3b-44d5-986e-2b72b5b52d5d.jpg?v=1774026188"},{"product_id":"3d-printed-minimal-wall-cat-bed-shelf","title":"3D Printed Minimal Wall Cat Bed Shelf | Floating Lounger","description":"\u003cp\u003eCreate an elevated lounging area with this 3D printed minimal wall cat bed shelf. The open platform has a curved front edge and raised back for a clean floating furniture profile.\u003c\/p\u003e\u003ch2\u003eProduct details\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eOne physical 3D printed wall-mounted cat lounger\u003c\/li\u003e\n\u003cli\u003eOpen platform with curved front and raised back\u003c\/li\u003e\n\u003cli\u003ePLA plastic construction\u003c\/li\u003e\n\u003cli\u003eAvailable in exterior sizes from 18 to 26 inches\u003c\/li\u003e\n\u003cli\u003eMounting hardware, cushion, cat and photo props are not included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCheck the sleeping area\u003c\/h2\u003e\u003cp\u003eThe option label gives the exterior size of the complete bed. It does not confirm the internal sleeping dimensions or suitability for a particular breed. Contact Decords for the usable platform measurements and compare them with the cat's body length and resting position before ordering.\u003c\/p\u003e\u003ch2\u003eInstallation and load\u003c\/h2\u003e\u003cp\u003eProfessional, load-appropriate installation is recommended. Select screws and anchors for the wall material, bed size, cat weight and dynamic force from jumping. No universal load rating is stated. Do not install above hazards, and inspect the bed and fixings regularly.\u003c\/p\u003e\u003ch2\u003ePet-use guidance\u003c\/h2\u003e\u003cp\u003eIntroduce the bed under supervision. Remove it immediately if cracks, deformation, loose fixings, sharp edges or chewing damage appear. PLA is not chew-proof and the bed is not a toy.\u003c\/p\u003e\u003ch2\u003e3D printed finish and care\u003c\/h2\u003e\u003cp\u003eFine layer lines and small surface variations are normal characteristics of 3D printing. Use indoors, clean gently and keep the bed away from high heat, open flames and prolonged direct sunlight.\u003c\/p\u003e\u003ch2\u003eProduction and delivery\u003c\/h2\u003e\u003cp\u003eThis item is produced to order. Current delivery methods and estimated times are shown at checkout and in the \u003ca href=\"\/pages\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e.\u003c\/p\u003e","brand":"Decords","offers":[{"title":"18 inches (45 cm)","offer_id":52736222462290,"sku":null,"price":138.0,"currency_code":"USD","in_stock":true},{"title":"20 inches (50 cm)","offer_id":52736222495058,"sku":null,"price":158.0,"currency_code":"USD","in_stock":true},{"title":"22 inches (55 cm)","offer_id":52736222527826,"sku":null,"price":198.0,"currency_code":"USD","in_stock":true},{"title":"24 inches (60 cm)","offer_id":52736222560594,"sku":null,"price":246.0,"currency_code":"USD","in_stock":true},{"title":"26 inches (65 cm)","offer_id":52736222593362,"sku":null,"price":277.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0608\/0888\/8570\/files\/il_fullxfull.7724711174_ta3v_c73928cb-7b66-434e-8557-b06b35badd6b.jpg?v=1774026195"},{"product_id":"3d-printed-barrel-wall-cat-bed","title":"3D Printed Barrel Wall Cat Bed | Floating Cat Cave","description":"\u003cp\u003eThis 3D printed wall-mounted cat bed uses a rounded barrel-like enclosure to create an elevated resting cave while keeping floor space clear.\u003c\/p\u003e\u003ch2\u003eSize and fit\u003c\/h2\u003e\u003cp\u003eChoose an exterior size from 18 to 26 inches. The listed size is an outside measurement and does not equal the usable interior sleeping area. Request the internal opening and resting dimensions before ordering, then compare them with the cat's body length and preferred resting position. Fit cannot be guaranteed by breed alone.\u003c\/p\u003e\u003ch2\u003eChoose the color\u003c\/h2\u003e\u003cp\u003eUse the 3D product color selector on this page to preview and choose an available print color. You can also place the order first and send the preferred color with the order number after purchase. Other available PLA colors can usually be produced on request, subject to material availability. Screen previews are approximate, and the finished shade can vary slightly between displays and production batches.\u003c\/p\u003e\u003ch2\u003eInstallation and safety\u003c\/h2\u003e\u003cp\u003eProfessional, load-appropriate installation is essential. Select screws and anchors for the wall construction, product size, cat weight and dynamic force from jumping. Mounting hardware is not included, and no universal load rating is stated. Test the installation before allowing access and inspect it regularly. Remove the bed if cracks, movement, deformation or chewing damage appears.\u003c\/p\u003e\u003ch2\u003eCare\u003c\/h2\u003e\u003cp\u003eKeep PLA indoors and away from high heat, flame and prolonged direct sunlight. Wipe gently with a soft dry or slightly damp cloth.\u003c\/p\u003e\u003ch2\u003eWhat is included\u003c\/h2\u003e\u003cp\u003eOne physical 3D printed barrel wall cat bed in the selected size and color. Mounting hardware, cushion, cat and photo props are not included.\u003c\/p\u003e\u003ch2\u003eProduction and delivery\u003c\/h2\u003e\u003cp\u003eThis item is produced to order. Current delivery methods and estimated times are shown at checkout and in the \u003ca href=\"\/pages\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e.\u003c\/p\u003e","brand":"Decords","offers":[{"title":"18 inches (45 cm)","offer_id":52736351732050,"sku":null,"price":138.0,"currency_code":"USD","in_stock":true},{"title":"20 inches (50 cm)","offer_id":52736351764818,"sku":null,"price":158.0,"currency_code":"USD","in_stock":true},{"title":"22 inches (55 cm)","offer_id":52736351797586,"sku":null,"price":198.0,"currency_code":"USD","in_stock":true},{"title":"24 inches (60 cm)","offer_id":52736351830354,"sku":null,"price":246.0,"currency_code":"USD","in_stock":true},{"title":"26 inches (65 cm)","offer_id":52736351863122,"sku":null,"price":277.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0608\/0888\/8570\/files\/il_fullxfull.7724740258_9gam_416648f1-e379-481a-8d05-e712cdb07073.jpg?v=1774026169"},{"product_id":"crown-shaped-wall-mounted-cat-bed-3d-80547","title":"3D Printed Crown Wall Cat Bed","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\u003cp\u003eThis wall-mounted cat bed features a crown-shaped cave with a rounded interior. It creates an elevated resting area while keeping floor space clear.\u003c\/p\u003e\u003ch2\u003eMaterials and finish\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e3D printed in matte PLA plastic.\u003c\/li\u003e\n\u003cli\u003eFine layer lines and small surface variations are normal for this process.\u003c\/li\u003e\n\u003cli\u003eColors may appear slightly different under different lighting or screen settings.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSize and ordering\u003c\/h2\u003e\u003cp\u003eChoose a listed exterior size from 18 to 26 inches. The size label does not confirm the internal sleeping dimensions or suitability for a particular cat. Contact us for internal dimensions and compare them with your pet before ordering.\u003c\/p\u003e\u003ch2\u003eUse and care\u003c\/h2\u003e\u003cp\u003eProfessional, load-appropriate installation is essential. Use screws and wall anchors suitable for the wall, bed size, cat weight and dynamic movement. Mounting hardware is not included. Inspect the installation regularly. Keep PLA away from high heat.\u003c\/p\u003e\u003ch2\u003eWhat is included\u003c\/h2\u003e\u003cp\u003eOne 3D printed crown wall cat bed. Mounting hardware, cushion, cat and photo props are not included.\u003c\/p\u003e\u003ch2\u003eProduction and delivery\u003c\/h2\u003e\u003cp\u003eProduction normally takes 1–3 business days. Free worldwide standard shipping is included.\u003c\/p\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003ch3\u003eWhat material is it made from?\u003c\/h3\u003e\u003cp\u003eIt is 3D printed from PLA plastic with a matte finish.\u003c\/p\u003e\u003ch3\u003eWill the surface be completely smooth?\u003c\/h3\u003e\u003cp\u003eNo. Fine print lines are a normal feature of layer-by-layer 3D printing.\u003c\/p\u003e\u003ch3\u003eWill a particular cat breed fit?\u003c\/h3\u003e\u003cp\u003eFit cannot be guaranteed by breed. Request the internal dimensions and compare them with your cat.\u003c\/p\u003e\u003ch3\u003eIs mounting hardware included?\u003c\/h3\u003e\u003cp\u003eNo. Select hardware for your wall type and the complete expected load.\u003c\/p\u003e\u003ch3\u003eIs there a universal weight rating?\u003c\/h3\u003e\u003cp\u003eNo universal rating is provided because capacity depends on size, wall construction and installation.\u003c\/p\u003e\u003ch3\u003eCan the color look different in person?\u003c\/h3\u003e\u003cp\u003eSlight variation is possible because lighting and screens display colors differently.\u003c\/p\u003e","brand":"Decords","offers":[{"title":"18 inches (45 cm)","offer_id":52736351895890,"sku":null,"price":138.0,"currency_code":"USD","in_stock":true},{"title":"20 inches (50 cm)","offer_id":52736351928658,"sku":null,"price":158.0,"currency_code":"USD","in_stock":true},{"title":"22 inches (55 cm)","offer_id":52736351961426,"sku":null,"price":198.0,"currency_code":"USD","in_stock":true},{"title":"24 inches (60 cm)","offer_id":52736351994194,"sku":null,"price":246.0,"currency_code":"USD","in_stock":true},{"title":"26 inches (65 cm)","offer_id":52736352026962,"sku":null,"price":277.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0608\/0888\/8570\/files\/il_fullxfull.7724733126_nhu8_1e3b78b8-7a62-4190-b795-1ac817a12add.jpg?v=1774026174"},{"product_id":"dark-fantasy-skull-wall-mounted-pet-bed-85209","title":"3D Printed Skull Wall Cat Bed","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\u003cp\u003eThis wall-mounted cat bed features a skull form with integrated cat ears and enclosed cavity. It creates an elevated resting area while keeping floor space clear.\u003c\/p\u003e\u003ch2\u003eMaterials and finish\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e3D printed in matte PLA plastic.\u003c\/li\u003e\n\u003cli\u003eFine layer lines and small surface variations are normal for this process.\u003c\/li\u003e\n\u003cli\u003eColors may appear slightly different under different lighting or screen settings.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSize and ordering\u003c\/h2\u003e\u003cp\u003eChoose a listed exterior size from 18 to 20 inches. The size label does not confirm the internal sleeping dimensions or suitability for a particular cat. Contact us for internal dimensions and compare them with your pet before ordering.\u003c\/p\u003e\u003ch2\u003eUse and care\u003c\/h2\u003e\u003cp\u003eProfessional, load-appropriate installation is essential. Use screws and wall anchors suitable for the wall, bed size, cat weight and dynamic movement. Mounting hardware is not included. Inspect the installation regularly. Keep PLA away from high heat.\u003c\/p\u003e\u003ch2\u003eWhat is included\u003c\/h2\u003e\u003cp\u003eOne 3D printed skull wall cat bed. Mounting hardware, cushion, cat and photo props are not included.\u003c\/p\u003e\u003ch2\u003eProduction and delivery\u003c\/h2\u003e\u003cp\u003eProduction normally takes 1–3 business days. Free worldwide standard shipping is included.\u003c\/p\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003ch3\u003eWhat material is it made from?\u003c\/h3\u003e\u003cp\u003eIt is 3D printed from PLA plastic with a matte finish.\u003c\/p\u003e\u003ch3\u003eWill the surface be completely smooth?\u003c\/h3\u003e\u003cp\u003eNo. Fine print lines are a normal feature of layer-by-layer 3D printing.\u003c\/p\u003e\u003ch3\u003eWill a particular cat breed fit?\u003c\/h3\u003e\u003cp\u003eFit cannot be guaranteed by breed. Request the internal dimensions and compare them with your cat.\u003c\/p\u003e\u003ch3\u003eIs mounting hardware included?\u003c\/h3\u003e\u003cp\u003eNo. Select hardware for your wall type and the complete expected load.\u003c\/p\u003e\u003ch3\u003eIs there a universal weight rating?\u003c\/h3\u003e\u003cp\u003eNo universal rating is provided because capacity depends on size, wall construction and installation.\u003c\/p\u003e\u003ch3\u003eCan the color look different in person?\u003c\/h3\u003e\u003cp\u003eSlight variation is possible because lighting and screens display colors differently.\u003c\/p\u003e","brand":"Decords","offers":[{"title":"18 inches (45 cm)","offer_id":52955701543250,"sku":null,"price":178.0,"currency_code":"USD","in_stock":true},{"title":"20 inches (50 cm)","offer_id":52955702034770,"sku":null,"price":198.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0608\/0888\/8570\/files\/il_fullxfull.7724745226_6n5z.jpg?v=1774026162"},{"product_id":"dark-fantasy-crescent-moon-wall-mounted-87775","title":"Crescent Moon Wall Cat Bed | 3D Printed Cat Cave","description":"\u003cp\u003eThis listing is for one physical wall-mounted crescent moon cat bed. The 3D printed cat cave creates an elevated resting nook with a dark fantasy silhouette while keeping floor space clear.\u003c\/p\u003e\u003cp\u003eThis is not a freestanding pet bed, scratching post, climbing system, or toy. The product must be securely mounted to a suitable structural surface before use.\u003c\/p\u003e\u003ch2\u003eChoose the exterior size\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e18 inches (45 cm)\u003c\/li\u003e\n\u003cli\u003e20 inches (50 cm)\u003c\/li\u003e\n\u003cli\u003e22 inches (55 cm)\u003c\/li\u003e\n\u003cli\u003e24 inches (60 cm)\u003c\/li\u003e\n\u003cli\u003e26 inches (65 cm)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe selected option refers to the listed exterior size of the complete moon. It does not state the internal opening or sleeping-space dimensions. Request the internal measurements before ordering and compare them with your cat’s body size, preferred sleeping position, and access needs.\u003c\/p\u003e\u003ch2\u003eMaterial and 3D printed finish\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e3D printed from matte PLA plastic.\u003c\/li\u003e\n\u003cli\u003eFine layer lines, seams, and small surface variations are normal results of layer-by-layer production.\u003c\/li\u003e\n\u003cli\u003eApparent color and texture can vary slightly with lighting, viewing angle, screen settings, and material batch.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePLA should be kept away from radiators, fireplaces, hot windows, and other high-temperature areas that can affect the shape of the printed material.\u003c\/p\u003e\u003ch2\u003eMounting requirements\u003c\/h2\u003e\u003cp\u003eMounting hardware is not included because the correct screws, anchors, and fixing method depend on the wall construction and total expected load. The installation must account for the bed, cat weight, jumping, landing, and other dynamic movement.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eUse a professional installer or another person experienced with load-bearing wall fixtures.\u003c\/li\u003e\n\u003cli\u003eChoose fixings approved for the specific wall type.\u003c\/li\u003e\n\u003cli\u003eMount into structural support where required.\u003c\/li\u003e\n\u003cli\u003eCheck stability before allowing a cat to enter.\u003c\/li\u003e\n\u003cli\u003eInspect the wall, fixings, and bed regularly and stop use if movement, cracking, or damage appears.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNo universal weight rating is provided because capacity depends on product size, wall structure, anchors, installation quality, and dynamic loading.\u003c\/p\u003e\u003ch2\u003eWhat is included\u003c\/h2\u003e\u003cul\u003e\u003cli\u003eOne 3D printed crescent moon wall cat bed in the selected exterior size\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eMounting hardware, cushion, blanket, cat, installation service, and photographed room props are not included.\u003c\/p\u003e\u003ch2\u003eCare\u003c\/h2\u003e\u003cp\u003eFor indoor use. Dust with a soft dry cloth. Do not use abrasive tools, alcohol, solvents, or high heat. Do not modify, drill, or cut the printed body without confirming that the alteration will not weaken it.\u003c\/p\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003ch3\u003eWill my cat fit?\u003c\/h3\u003e\u003cp\u003eFit cannot be guaranteed by breed or weight alone. Request the internal dimensions and compare them with your individual cat before ordering.\u003c\/p\u003e\u003ch3\u003eIs the selected size the inside sleeping area?\u003c\/h3\u003e\u003cp\u003eNo. It is the listed exterior size of the complete crescent moon.\u003c\/p\u003e\u003ch3\u003eIs mounting hardware supplied?\u003c\/h3\u003e\u003cp\u003eNo. Hardware must be selected for the wall type and complete expected load.\u003c\/p\u003e\u003ch3\u003eCan I use it without mounting it?\u003c\/h3\u003e\u003cp\u003eNo. The design is intended to be securely wall mounted before a cat uses it.\u003c\/p\u003e\u003ch3\u003eWhere can I browse related products?\u003c\/h3\u003e\u003cp\u003eExplore more \u003ca href=\"\/collections\/unique-3d-printed-home-decor-products-gifts\"\u003e3D printed home decor and gifts\u003c\/a\u003e or browse \u003ca href=\"\/collections\/3d-printed-items\"\u003efeatured 3D printed items\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eProduction and delivery\u003c\/h2\u003e\u003cp\u003eDecords normally produces orders in Estonia within 1–3 business days before dispatch. Free worldwide standard shipping is included.\u003c\/p\u003e","brand":"Decords","offers":[{"title":"18 inches (45 cm)","offer_id":52955698790738,"sku":null,"price":138.0,"currency_code":"USD","in_stock":true},{"title":"20 inches (50 cm)","offer_id":52955699282258,"sku":null,"price":158.0,"currency_code":"USD","in_stock":true},{"title":"22 inches (55 cm)","offer_id":52955699773778,"sku":null,"price":198.0,"currency_code":"USD","in_stock":true},{"title":"24 inches (60 cm)","offer_id":52955700265298,"sku":null,"price":246.0,"currency_code":"USD","in_stock":true},{"title":"26 inches (65 cm)","offer_id":52955700756818,"sku":null,"price":277.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0608\/0888\/8570\/files\/il_fullxfull.7724774934_a66g.jpg?v=1774026156"},{"product_id":"horned-cat-cave-bed-3d-printed-floor-34104","title":"3D Printed Horned Cat Cave Bed","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\u003cp\u003eThis horned floor-standing cat cave forms an enclosed pod-style resting space. It is produced as a modular 3D printed kit and arrives in at least four sections; the exact number depends on the selected size.\u003c\/p\u003e\u003ch2\u003eMaterials and finish\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e3D printed in matte PLA plastic.\u003c\/li\u003e\n\u003cli\u003eFine layer lines and small surface variations are normal for this process.\u003c\/li\u003e\n\u003cli\u003eColors may appear slightly different under different lighting or screen settings.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSize and ordering\u003c\/h2\u003e\u003cp\u003eChoose one of the listed exterior sizes from 18 to 26 inches. These labels do not confirm the internal sleeping dimensions or suitability for a particular cat. Compare your pet's measurements and contact us for internal dimensions before ordering.\u003c\/p\u003e\u003ch2\u003eUse and care\u003c\/h2\u003e\u003cp\u003eAssembly is required. Align and join the supplied sections according to the product construction; connection seams remain visible. Place the completed cave on a stable, level indoor floor and inspect it regularly. Keep PLA away from high heat.\u003c\/p\u003e\u003ch2\u003eWhat is included\u003c\/h2\u003e\u003cp\u003eOne modular 3D printed horned cat cave bed. A cushion, cat and other photo props are not included. No wall mounting hardware is needed because this is a floor-standing product.\u003c\/p\u003e\u003ch2\u003eProduction and delivery\u003c\/h2\u003e\u003cp\u003eProduction normally takes 1–3 business days. Free worldwide standard shipping is included.\u003c\/p\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003ch3\u003eWhat material is it made from?\u003c\/h3\u003e\u003cp\u003eIt is 3D printed from PLA plastic with a matte finish.\u003c\/p\u003e\u003ch3\u003eWill the surface be completely smooth?\u003c\/h3\u003e\u003cp\u003eNo. Fine print lines are a normal feature of layer-by-layer 3D printing.\u003c\/p\u003e\u003ch3\u003eDoes it arrive in one piece?\u003c\/h3\u003e\u003cp\u003eNo. It arrives as a modular kit of at least four sections and requires assembly.\u003c\/p\u003e\u003ch3\u003eWill a specific cat breed fit?\u003c\/h3\u003e\u003cp\u003eFit cannot be guaranteed by breed. Contact us for internal dimensions and compare them with your cat.\u003c\/p\u003e\u003ch3\u003eAre the connection seams visible?\u003c\/h3\u003e\u003cp\u003eYes. Seams are a normal result of the modular construction.\u003c\/p\u003e\u003ch3\u003eCan the color look different in person?\u003c\/h3\u003e\u003cp\u003eSlight variation is possible because lighting and screens display colors differently.\u003c\/p\u003e","brand":"Decords","offers":[{"title":"18 inches (45 cm)","offer_id":52921008587090,"sku":null,"price":138.0,"currency_code":"USD","in_stock":true},{"title":"20 inches (50 cm)","offer_id":52921008619858,"sku":null,"price":158.0,"currency_code":"USD","in_stock":true},{"title":"22 inches (55 cm)","offer_id":52921008652626,"sku":null,"price":198.0,"currency_code":"USD","in_stock":true},{"title":"24 inches (60 cm)","offer_id":52921008685394,"sku":null,"price":246.0,"currency_code":"USD","in_stock":true},{"title":"26 inches (65 cm)","offer_id":52921008718162,"sku":null,"price":277.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0608\/0888\/8570\/files\/il_fullxfull.7793731068_s54u_d483e04f-c35d-4758-b78f-5853eeef74eb.jpg?v=1774025130"},{"product_id":"gothic-wall-mounted-pet-bowl-holder-3d-34708","title":"Gothic Wall Pet Bowl Holder | 3D Printed Feeder Frame","description":"\u003cp\u003eA gothic wall-mounted pet bowl holder with an ornate fantasy-inspired frame and a circular opening for a separate bowl. It can raise a feeding bowl while reducing floor clutter for a cat or small dog.\u003c\/p\u003e\u003ch2\u003eProduct details\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eWall-mounted modular feeder frame\u003c\/li\u003e\n\u003cli\u003eAvailable current options: 5 inches (13 cm) and 6 inches (15 cm)\u003c\/li\u003e\n\u003cli\u003eDesigned for a separate removable bowl\u003c\/li\u003e\n\u003cli\u003e3D printed from PLA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCompatibility and installation\u003c\/h2\u003e\u003cp\u003eThe bowl and mounting hardware are not included. Compare the selected holder dimensions with the intended bowl before ordering. Use screws and wall anchors suitable for the wall material, pet, feeding height, and expected load.\u003c\/p\u003e\u003ch2\u003eWhat is included\u003c\/h2\u003e\u003cp\u003eOne modular 3D printed wall-mounted pet bowl holder is included. It arrives in separate parts for safer shipping and assembly. The bowl, pet, screws, anchors, and styling objects are not included.\u003c\/p\u003e\u003ch2\u003e3D printed finish\u003c\/h2\u003e\u003cp\u003eFine layer lines can be visible at close range and are a normal characteristic of 3D printing. Color can vary slightly because of lighting, photography, filament batches, and screen settings.\u003c\/p\u003e\u003ch2\u003eProduction and delivery\u003c\/h2\u003e\u003cp\u003eProduction normally takes 1–3 business days. Free worldwide standard shipping is included.\u003c\/p\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003ch3\u003eIs the pet bowl included?\u003c\/h3\u003e\u003cp\u003eNo. Select a separate bowl that fits the chosen holder opening.\u003c\/p\u003e\u003ch3\u003eWhich sizes can currently be ordered?\u003c\/h3\u003e\u003cp\u003eThe live product options are 5 inches (13 cm) and 6 inches (15 cm).\u003c\/p\u003e\u003ch3\u003eAre mounting screws included?\u003c\/h3\u003e\u003cp\u003eNo. Use hardware appropriate for the wall type and intended load.\u003c\/p\u003e","brand":"Decords","offers":[{"title":"5 inches (13 cm)","offer_id":52967830094162,"sku":null,"price":78.8,"currency_code":"USD","in_stock":true},{"title":"6 inches (15 cm)","offer_id":52967830126930,"sku":null,"price":88.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0608\/0888\/8570\/files\/il_fullxfull.7814468672_oti6.jpg?v=1774024812"},{"product_id":"3d-printed-minimal-wall-pet-bowl-holder","title":"3D Printed Minimal Wall Pet Bowl Holder | Elevated Feeder","description":"\u003cp\u003eCreate a clean elevated feeding area with this 3D printed minimal wall pet bowl holder. A curved architectural bracket supports a circular opening for a separate removable bowl while keeping floor space clear.\u003c\/p\u003e\u003ch2\u003eProduct details\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eOne physical 3D printed wall-mounted bowl holder\u003c\/li\u003e\n\u003cli\u003eMinimal curved bracket with circular bowl opening\u003c\/li\u003e\n\u003cli\u003ePLA plastic construction\u003c\/li\u003e\n\u003cli\u003eAvailable in listed 5 and 6 inch holder sizes\u003c\/li\u003e\n\u003cli\u003eBowl, mounting hardware, food and photo props are not included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCheck bowl fit before ordering\u003c\/h2\u003e\u003cp\u003eThe option labels describe the listed holder size, not a guaranteed opening diameter. Bowl rims, bases and profiles vary. Contact Decords with the bowl diameter, rim width, base diameter and height before ordering when fit is important.\u003c\/p\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cp\u003eSelect screws and anchors for the wall material, holder size, bowl weight, contents and movement during use. No universal load rating is stated. Install securely, keep the holder level and inspect the fixings regularly.\u003c\/p\u003e\u003ch2\u003eUse and cleaning\u003c\/h2\u003e\u003cp\u003eKeep food and water inside a separate removable bowl. Wash the bowl separately and wipe the PLA holder with a soft dry or slightly damp cloth. Do not place the holder in a dishwasher or expose it to hot water.\u003c\/p\u003e\u003ch2\u003ePet-use guidance\u003c\/h2\u003e\u003cp\u003eSupervise initial use and inspect for cracks, deformation, sharp edges or chewing damage. Remove the holder immediately if damaged. PLA is not chew-proof and the holder is not intended as a toy.\u003c\/p\u003e\u003ch2\u003eProduction and delivery\u003c\/h2\u003e\u003cp\u003eThis item is produced to order. Current delivery methods and estimated times are shown at checkout and in the \u003ca href=\"\/pages\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e.\u003c\/p\u003e","brand":"Decords","offers":[{"title":"5 inches (13 cm)","offer_id":52961616167250,"sku":null,"price":78.8,"currency_code":"USD","in_stock":true},{"title":"6 inches (15 cm)","offer_id":52961616691538,"sku":null,"price":88.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0608\/0888\/8570\/files\/il_fullxfull.7862629739_sh6d.jpg?v=1774024802"},{"product_id":"bunny-wall-mounted-pet-bowl-holder-3d-78397","title":"3D Printed Bunny Wall-Mounted Pet Bowl Holder","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\u003cp\u003eThis wall-mounted pet bowl holder uses a bunny-ear backplate to create an elevated feeding position while keeping the floor area clear. A separate bowl sits in the circular opening.\u003c\/p\u003e\u003ch2\u003eMaterials and finish\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e3D printed in matte PLA plastic.\u003c\/li\u003e\n\u003cli\u003eFine layer lines and small surface variations are normal for this process.\u003c\/li\u003e\n\u003cli\u003eColors may appear slightly different under different lighting or screen settings.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSize and ordering\u003c\/h2\u003e\u003cp\u003eThe current product variants are 5 inches (13 cm) and 6 inches (15 cm). These labels describe the holder size, not a guaranteed bowl opening. Bowl rims and profiles vary, so contact us with the bowl diameter, rim and base measurements before ordering if fit is critical.\u003c\/p\u003e\u003ch2\u003eUse and care\u003c\/h2\u003e\u003cp\u003eInstall with screws and wall anchors suitable for the wall and combined load of holder, bowl, food or water. Check the mounting and bowl fit regularly. Hand-wipe only and keep PLA away from high heat.\u003c\/p\u003e\u003ch2\u003eWhat is included\u003c\/h2\u003e\u003cp\u003eOne 3D printed bunny wall-mounted pet bowl holder. The bowl, mounting hardware, pet and photo props are not included.\u003c\/p\u003e\u003ch2\u003eProduction and delivery\u003c\/h2\u003e\u003cp\u003eProduction normally takes 1–3 business days. Free worldwide standard shipping is included.\u003c\/p\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003ch3\u003eWhat material is it made from?\u003c\/h3\u003e\u003cp\u003eIt is 3D printed from PLA plastic with a matte finish.\u003c\/p\u003e\u003ch3\u003eWill the surface be completely smooth?\u003c\/h3\u003e\u003cp\u003eNo. Fine print lines are a normal feature of layer-by-layer 3D printing.\u003c\/p\u003e\u003ch3\u003eIs a pet bowl included?\u003c\/h3\u003e\u003cp\u003eNo. The listing includes the 3D printed holder only.\u003c\/p\u003e\u003ch3\u003eWill my bowl fit?\u003c\/h3\u003e\u003cp\u003eFit is not universal. Contact us with your bowl dimensions before ordering.\u003c\/p\u003e\u003ch3\u003eIs mounting hardware included?\u003c\/h3\u003e\u003cp\u003eNo. Select screws and anchors appropriate for your wall and intended load.\u003c\/p\u003e\u003ch3\u003eCan the color look different in person?\u003c\/h3\u003e\u003cp\u003eSlight variation is possible because lighting and screens display colors differently.\u003c\/p\u003e","brand":"Decords","offers":[{"title":"5 inches (13 cm)","offer_id":52964017013074,"sku":null,"price":78.8,"currency_code":"USD","in_stock":true},{"title":"6 inches (15 cm)","offer_id":52964017537362,"sku":null,"price":88.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0608\/0888\/8570\/files\/il_fullxfull.7862773667_p2ym.jpg?v=1774024738"},{"product_id":"heart-wall-mounted-pet-bowl-holder-3d-77161","title":"3D Printed Heart Wall-Mounted Pet Bowl Holder","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\u003cp\u003eThis wall-mounted pet bowl holder uses a heart-shaped backplate to create an elevated feeding position while keeping the floor area clear. A separate bowl sits in the circular opening.\u003c\/p\u003e\u003ch2\u003eMaterials and finish\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e3D printed in matte PLA plastic.\u003c\/li\u003e\n\u003cli\u003eFine layer lines and small surface variations are normal for this process.\u003c\/li\u003e\n\u003cli\u003eColors may appear slightly different under different lighting or screen settings.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSize and ordering\u003c\/h2\u003e\u003cp\u003eThe current product variants are 5 inches (13 cm) and 6 inches (15 cm). These labels describe the holder size, not a guaranteed bowl opening. Bowl rims and profiles vary, so contact us with the bowl diameter, rim and base measurements before ordering if fit is critical.\u003c\/p\u003e\u003ch2\u003eUse and care\u003c\/h2\u003e\u003cp\u003eInstall with screws and wall anchors suitable for the wall and combined load of holder, bowl, food or water. Check the mounting and bowl fit regularly. Hand-wipe only and keep PLA away from high heat.\u003c\/p\u003e\u003ch2\u003eWhat is included\u003c\/h2\u003e\u003cp\u003eOne 3D printed heart wall-mounted pet bowl holder. The bowl, mounting hardware, pet and photo props are not included.\u003c\/p\u003e\u003ch2\u003eProduction and delivery\u003c\/h2\u003e\u003cp\u003eProduction normally takes 1–3 business days. Free worldwide standard shipping is included.\u003c\/p\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003ch3\u003eWhat material is it made from?\u003c\/h3\u003e\u003cp\u003eIt is 3D printed from PLA plastic with a matte finish.\u003c\/p\u003e\u003ch3\u003eWill the surface be completely smooth?\u003c\/h3\u003e\u003cp\u003eNo. Fine print lines are a normal feature of layer-by-layer 3D printing.\u003c\/p\u003e\u003ch3\u003eIs a pet bowl included?\u003c\/h3\u003e\u003cp\u003eNo. The listing includes the 3D printed holder only.\u003c\/p\u003e\u003ch3\u003eWill my bowl fit?\u003c\/h3\u003e\u003cp\u003eFit is not universal. Contact us with your bowl dimensions before ordering.\u003c\/p\u003e\u003ch3\u003eIs mounting hardware included?\u003c\/h3\u003e\u003cp\u003eNo. Select screws and anchors appropriate for your wall and intended load.\u003c\/p\u003e\u003ch3\u003eCan the color look different in person?\u003c\/h3\u003e\u003cp\u003eSlight variation is possible because lighting and screens display colors differently.\u003c\/p\u003e","brand":"Decords","offers":[{"title":"5 inches (13 cm)","offer_id":52964019110226,"sku":null,"price":78.8,"currency_code":"USD","in_stock":true},{"title":"6 inches (15 cm)","offer_id":52964019634514,"sku":null,"price":88.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0608\/0888\/8570\/files\/il_fullxfull.7814796362_ph5p.jpg?v=1774024743"},{"product_id":"crown-wall-mounted-pet-bowl-holder-3d-60123","title":"3D Printed Crown Wall-Mounted Pet Bowl Holder","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\u003cp\u003eThis wall-mounted pet bowl holder uses a fantasy crown-shaped backplate to create an elevated feeding position while keeping the floor area clear. A separate bowl sits in the circular opening.\u003c\/p\u003e\u003ch2\u003eMaterials and finish\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e3D printed in matte PLA plastic.\u003c\/li\u003e\n\u003cli\u003eFine layer lines and small surface variations are normal for this process.\u003c\/li\u003e\n\u003cli\u003eColors may appear slightly different under different lighting or screen settings.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSize and ordering\u003c\/h2\u003e\u003cp\u003eThe current product variants are 5 inches (13 cm) and 6 inches (15 cm). These labels describe the holder size, not a guaranteed bowl opening. Bowl rims and profiles vary, so contact us with the bowl diameter, rim and base measurements before ordering if fit is critical.\u003c\/p\u003e\u003ch2\u003eUse and care\u003c\/h2\u003e\u003cp\u003eInstall with screws and wall anchors suitable for the wall and combined load of holder, bowl, food or water. Check the mounting and bowl fit regularly. Hand-wipe only and keep PLA away from high heat.\u003c\/p\u003e\u003ch2\u003eWhat is included\u003c\/h2\u003e\u003cp\u003eOne 3D printed crown wall-mounted pet bowl holder. The bowl, mounting hardware, pet and photo props are not included.\u003c\/p\u003e\u003ch2\u003eProduction and delivery\u003c\/h2\u003e\u003cp\u003eProduction normally takes 1–3 business days. Free worldwide standard shipping is included.\u003c\/p\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003ch3\u003eWhat material is it made from?\u003c\/h3\u003e\u003cp\u003eIt is 3D printed from PLA plastic with a matte finish.\u003c\/p\u003e\u003ch3\u003eWill the surface be completely smooth?\u003c\/h3\u003e\u003cp\u003eNo. Fine print lines are a normal feature of layer-by-layer 3D printing.\u003c\/p\u003e\u003ch3\u003eIs a pet bowl included?\u003c\/h3\u003e\u003cp\u003eNo. The listing includes the 3D printed holder only.\u003c\/p\u003e\u003ch3\u003eWill my bowl fit?\u003c\/h3\u003e\u003cp\u003eFit is not universal. Contact us with your bowl dimensions before ordering.\u003c\/p\u003e\u003ch3\u003eIs mounting hardware included?\u003c\/h3\u003e\u003cp\u003eNo. Select screws and anchors appropriate for your wall and intended load.\u003c\/p\u003e\u003ch3\u003eCan the color look different in person?\u003c\/h3\u003e\u003cp\u003eSlight variation is possible because lighting and screens display colors differently.\u003c\/p\u003e","brand":"Decords","offers":[{"title":"5 inches (13 cm)","offer_id":52964515938642,"sku":null,"price":78.8,"currency_code":"USD","in_stock":true},{"title":"6 inches (15 cm)","offer_id":52964516462930,"sku":null,"price":88.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0608\/0888\/8570\/files\/il_fullxfull.7814713274_hexa.jpg?v=1774024759"},{"product_id":"3d-printed-koala-wall-pet-bowl-holder","title":"3D Printed Koala Wall Pet Bowl Holder | Elevated Feeder","description":"\u003cp\u003eCreate an elevated feeding position with this 3D printed koala wall pet bowl holder. The friendly koala-face backplate supports a circular opening for a separate removable bowl while keeping the floor area clear.\u003c\/p\u003e\u003ch2\u003eProduct details\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eOne physical 3D printed wall-mounted bowl holder\u003c\/li\u003e\n\u003cli\u003eKoala-face backplate with circular bowl opening\u003c\/li\u003e\n\u003cli\u003ePLA plastic construction\u003c\/li\u003e\n\u003cli\u003eAvailable in listed 5 and 6 inch holder sizes\u003c\/li\u003e\n\u003cli\u003eBowl, mounting hardware, food and photo props are not included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCheck bowl fit before ordering\u003c\/h2\u003e\u003cp\u003eThe option labels describe the listed holder size, not a guaranteed opening diameter. Bowl rims, bases and profiles vary. Contact Decords with the bowl diameter, rim width, base diameter and height before ordering when fit is important.\u003c\/p\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cp\u003eSelect screws and anchors for the wall material, holder size, bowl weight, contents and movement during use. No universal load rating is stated. Install securely, keep the holder level and inspect the fixings regularly.\u003c\/p\u003e\u003ch2\u003eUse and cleaning\u003c\/h2\u003e\u003cp\u003eKeep food and water inside a separate removable bowl. Wash the bowl separately and wipe the PLA holder with a soft dry or slightly damp cloth. Do not place the holder in a dishwasher or expose it to hot water.\u003c\/p\u003e\u003ch2\u003ePet-use guidance\u003c\/h2\u003e\u003cp\u003eSupervise initial use and inspect for cracks, deformation, sharp edges or chewing damage. Remove the holder immediately if damaged. PLA is not chew-proof and the holder is not intended as a toy.\u003c\/p\u003e\u003ch2\u003eProduction and delivery\u003c\/h2\u003e\u003cp\u003eThis item is produced to order. Current delivery methods and estimated times are shown at checkout and in the \u003ca href=\"\/pages\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e.\u003c\/p\u003e","brand":"Decords","offers":[{"title":"5 inches (13 cm)","offer_id":52964518035794,"sku":null,"price":78.8,"currency_code":"USD","in_stock":true},{"title":"6 inches (15 cm)","offer_id":52964518560082,"sku":null,"price":88.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0608\/0888\/8570\/files\/il_fullxfull.7814724732_eyxl.jpg?v=1774024753"},{"product_id":"bear-wall-mounted-pet-bowl-holder-3d-71419","title":"3D Printed Bear Wall-Mounted Pet Bowl Holder","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\u003cp\u003eThis wall-mounted pet bowl holder uses a rounded bear-face backplate to create an elevated feeding position while keeping the floor area clear. A separate bowl sits in the circular opening.\u003c\/p\u003e\u003ch2\u003eMaterials and finish\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e3D printed in matte PLA plastic.\u003c\/li\u003e\n\u003cli\u003eFine layer lines and small surface variations are normal for this process.\u003c\/li\u003e\n\u003cli\u003eColors may appear slightly different under different lighting or screen settings.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSize and ordering\u003c\/h2\u003e\u003cp\u003eThe current product variants are 5 inches (13 cm) and 6 inches (15 cm). These labels describe the holder size, not a guaranteed bowl opening. Bowl rims and profiles vary, so contact us with the bowl diameter, rim and base measurements before ordering if fit is critical.\u003c\/p\u003e\u003ch2\u003eUse and care\u003c\/h2\u003e\u003cp\u003eInstall with screws and wall anchors suitable for the wall and combined load of holder, bowl, food or water. Check the mounting and bowl fit regularly. Hand-wipe only and keep PLA away from high heat.\u003c\/p\u003e\u003ch2\u003eWhat is included\u003c\/h2\u003e\u003cp\u003eOne 3D printed bear wall-mounted pet bowl holder. The bowl, mounting hardware, pet and photo props are not included.\u003c\/p\u003e\u003ch2\u003eProduction and delivery\u003c\/h2\u003e\u003cp\u003eProduction normally takes 1–3 business days. Free worldwide standard shipping is included.\u003c\/p\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003ch3\u003eWhat material is it made from?\u003c\/h3\u003e\u003cp\u003eIt is 3D printed from PLA plastic with a matte finish.\u003c\/p\u003e\u003ch3\u003eWill the surface be completely smooth?\u003c\/h3\u003e\u003cp\u003eNo. Fine print lines are a normal feature of layer-by-layer 3D printing.\u003c\/p\u003e\u003ch3\u003eIs a pet bowl included?\u003c\/h3\u003e\u003cp\u003eNo. The listing includes the 3D printed holder only.\u003c\/p\u003e\u003ch3\u003eWill my bowl fit?\u003c\/h3\u003e\u003cp\u003eFit is not universal. Contact us with your bowl dimensions before ordering.\u003c\/p\u003e\u003ch3\u003eIs mounting hardware included?\u003c\/h3\u003e\u003cp\u003eNo. Select screws and anchors appropriate for your wall and intended load.\u003c\/p\u003e\u003ch3\u003eCan the color look different in person?\u003c\/h3\u003e\u003cp\u003eSlight variation is possible because lighting and screens display colors differently.\u003c\/p\u003e","brand":"Decords","offers":[{"title":"5 inches (13 cm)","offer_id":52964520165714,"sku":null,"price":78.8,"currency_code":"USD","in_stock":true},{"title":"6 inches (15 cm)","offer_id":52964520690002,"sku":null,"price":88.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0608\/0888\/8570\/files\/il_fullxfull.7814787512_r0ug_9fe36e33-9dbf-4e02-92c5-7e503d26f38f.jpg?v=1774024748"},{"product_id":"3d-printed-horned-pet-bowl-stand","title":"3D Printed Horned Pet Bowl Stand | Fantasy Raised Holder","description":"\u003cp\u003eCreate a raised fantasy-inspired feeding station with this 3D printed horned pet bowl stand. Two curved horn forms surround the bowl position while the freestanding base keeps the feeding area visually contained.\u003c\/p\u003e\u003ch2\u003eProduct details\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eOne physical 3D printed pet bowl stand\u003c\/li\u003e\n\u003cli\u003eFreestanding horned frame\u003c\/li\u003e\n\u003cli\u003ePLA plastic construction\u003c\/li\u003e\n\u003cli\u003eAvailable in listed 5 and 6 inch holder sizes\u003c\/li\u003e\n\u003cli\u003eBowl, food and photo props are not included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCheck bowl fit before ordering\u003c\/h2\u003e\u003cp\u003eThe option labels describe the listed holder size, not a guaranteed bowl-opening diameter. Bowl rims, bases and profiles vary. Contact Decords with the bowl diameter, rim width, base diameter and height before ordering when fit is important.\u003c\/p\u003e\u003ch2\u003eUse and cleaning\u003c\/h2\u003e\u003cp\u003ePlace the stand on a stable, level indoor surface. Keep food and water inside a separate removable bowl. Wash the bowl separately and wipe the PLA holder with a soft dry or slightly damp cloth. Do not place the holder in a dishwasher or expose it to hot water.\u003c\/p\u003e\u003ch2\u003ePet-use guidance\u003c\/h2\u003e\u003cp\u003eSupervise initial use and inspect the holder regularly for cracks, deformation, sharp edges or chewing damage. Remove it immediately if damaged. PLA is not chew-proof and the holder is not intended as a toy.\u003c\/p\u003e\u003ch2\u003e3D printed finish and care\u003c\/h2\u003e\u003cp\u003eFine layer lines and small surface variations are normal characteristics of 3D printing. Keep the stand away from high heat, open flames and prolonged direct sunlight.\u003c\/p\u003e\u003ch2\u003eProduction and delivery\u003c\/h2\u003e\u003cp\u003eThis item is produced to order. Current delivery methods and estimated times are shown at checkout and in the \u003ca href=\"\/pages\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e.\u003c\/p\u003e","brand":"Decords","offers":[{"title":"5 inches (13 cm)","offer_id":52967994818898,"sku":null,"price":78.8,"currency_code":"USD","in_stock":true},{"title":"6 inches (15 cm)","offer_id":52967994851666,"sku":null,"price":88.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0608\/0888\/8570\/files\/il_fullxfull.7865294341_594r.jpg?v=1774024732"},{"product_id":"castle-pet-bowl-holder-stand-3d-printed-99028","title":"3D Printed Castle Pet Bowl Holder Stand","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\u003cp\u003eThis freestanding pet bowl holder uses two castle-like turret forms around the central bowl position to create a raised, fantasy-inspired feeding display for cats or small dogs. It is supplied without a bowl.\u003c\/p\u003e\u003ch2\u003eMaterials and finish\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e3D printed in matte PLA plastic.\u003c\/li\u003e\n\u003cli\u003eFine layer lines and small surface variations are normal for this process.\u003c\/li\u003e\n\u003cli\u003eColors may look slightly different under different lighting or screen settings.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSize and ordering\u003c\/h2\u003e\u003cp\u003eThe current options are 5 inches (13 cm) and 6 inches (15 cm). These labels describe the holder size, not a guaranteed bowl opening. Bowl shapes and rims vary, so contact us with your bowl dimensions before ordering if fit is critical.\u003c\/p\u003e\u003ch2\u003eUse and care\u003c\/h2\u003e\u003cp\u003eUse indoors on a stable, level and dry surface. Check stability and bowl fit before each use, and supervise the pet. Hand-wipe only; keep PLA away from high heat.\u003c\/p\u003e\u003ch2\u003eWhat is included\u003c\/h2\u003e\u003cp\u003eOne 3D printed castle pet bowl holder stand. The pet bowl, food, pets and other props are not included.\u003c\/p\u003e\u003ch2\u003eProduction and delivery\u003c\/h2\u003e\u003cp\u003eProduction normally takes 1–3 business days. Free worldwide standard shipping is included.\u003c\/p\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003ch3\u003eWhat material is it made from?\u003c\/h3\u003e\u003cp\u003eIt is 3D printed from PLA plastic with a matte finish.\u003c\/p\u003e\u003ch3\u003eWill the surface be completely smooth?\u003c\/h3\u003e\u003cp\u003eNo. Fine print lines are a normal feature of layer-by-layer 3D printing.\u003c\/p\u003e\u003ch3\u003eIs a pet bowl included?\u003c\/h3\u003e\u003cp\u003eNo. The listing includes the 3D printed holder only.\u003c\/p\u003e\u003ch3\u003eWill my bowl fit?\u003c\/h3\u003e\u003cp\u003eFit is not universal. Contact us with your bowl diameter, rim and base measurements before ordering.\u003c\/p\u003e\u003ch3\u003eCan the color look different in person?\u003c\/h3\u003e\u003cp\u003eSlight variation is possible because lighting and screens display colors differently.\u003c\/p\u003e","brand":"Decords","offers":[{"title":"5 inches (13 cm)","offer_id":52968007991634,"sku":null,"price":78.8,"currency_code":"USD","in_stock":true},{"title":"6 inches (15 cm)","offer_id":52968008024402,"sku":null,"price":88.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0608\/0888\/8570\/files\/il_fullxfull.7865305005_ljh2.jpg?v=1774024728"},{"product_id":"3d-printed-mushroom-small-pet-hideout","title":"3D Printed Mushroom Small Pet Hideout | Hamster House","description":"\u003cp\u003eAdd a mushroom-shaped retreat to a compatible small-animal enclosure with this 3D printed hideout. The rounded cap and arched entrance create a covered space for a suitably sized hamster, mouse or similar small pet.\u003c\/p\u003e\u003ch2\u003eProduct details\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eOne physical 3D printed small-animal hideout\u003c\/li\u003e\n\u003cli\u003eMushroom-shaped design with entrance and side openings\u003c\/li\u003e\n\u003cli\u003ePLA plastic construction\u003c\/li\u003e\n\u003cli\u003eAvailable in overall sizes from 4 to 13 inches\u003c\/li\u003e\n\u003cli\u003eEnclosure, bedding, food and other accessories are not included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCheck the fit before ordering\u003c\/h2\u003e\u003cp\u003eThe option label gives the longest exterior dimension, not the entrance or internal floor space. The model scales proportionally. Request the entrance and internal measurements and compare them with your pet before ordering. The animal must be able to enter, turn around and leave without becoming trapped.\u003c\/p\u003e\u003ch2\u003eUse and safety\u003c\/h2\u003e\u003cp\u003eThis hideout is an enclosure accessory, not a complete cage or primary habitat. Use only in a dry indoor enclosure. Introduce it under supervision and inspect it daily for chewing, cracks, deformation, loose sections or sharp edges. Remove it immediately if damaged. PLA is not chew-proof or edible, so this product is unsuitable for persistent plastic chewers.\u003c\/p\u003e\u003ch2\u003eCleaning and care\u003c\/h2\u003e\u003cp\u003eWipe with a soft cloth and lukewarm water, then dry completely before returning it to the enclosure. Do not use as a food or water vessel. Do not place it in a dishwasher or expose it to boiling water, open flames, high heat or prolonged direct sunlight.\u003c\/p\u003e\u003ch2\u003e3D printed finish\u003c\/h2\u003e\u003cp\u003eFine layer lines and small surface variations are normal characteristics of 3D printing.\u003c\/p\u003e\u003ch2\u003eProduction and delivery\u003c\/h2\u003e\u003cp\u003eThis item is produced to order. Current delivery methods and estimated times are shown at checkout and in the \u003ca href=\"\/pages\/shipping-policy\"\u003eShipping Policy\u003c\/a\u003e.\u003c\/p\u003e","brand":"Decords","offers":[{"title":"4 inches (10 cm)","offer_id":54314257678674,"sku":"PRE-3DPRI-4IN-J0I","price":19.8,"currency_code":"USD","in_stock":true},{"title":"5 inches (13 cm)","offer_id":54314257711442,"sku":"PRE-3DPRI-5IN-J0I","price":28.8,"currency_code":"USD","in_stock":true},{"title":"6 inches (15 cm)","offer_id":54314257744210,"sku":"PRE-3DPRI-6IN-J0I","price":34.7,"currency_code":"USD","in_stock":true},{"title":"7 inches (18 cm)","offer_id":54314257776978,"sku":"PRE-3DPRI-7IN-J0I","price":48.8,"currency_code":"USD","in_stock":true},{"title":"8 inches (21 cm)","offer_id":54314257809746,"sku":"PRE-3DPRI-8IN-J0I","price":59.7,"currency_code":"USD","in_stock":true},{"title":"9 inches (23 cm)","offer_id":54314257842514,"sku":"PRE-3DPRI-9IN-J0I","price":68.8,"currency_code":"USD","in_stock":true},{"title":"10 inches (25 cm)","offer_id":54314257875282,"sku":"PRE-3DPRI-10I-J0I","price":78.8,"currency_code":"USD","in_stock":true},{"title":"11 inches (28 cm)","offer_id":54314257908050,"sku":"PRE-3DPRI-11I-J0I","price":88.7,"currency_code":"USD","in_stock":true},{"title":"12 inches (31 cm)","offer_id":54314257940818,"sku":"PRE-3DPRI-12I-J0I","price":99.7,"currency_code":"USD","in_stock":true},{"title":"13 inches (33 cm)","offer_id":54314257973586,"sku":"PRE-3DPRI-13I-J0I","price":117.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0608\/0888\/8570\/files\/il_fullxfull.8402831666_9qa7.jpg?v=1787142813"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0608\/0888\/8570\/collections\/il_fullxfull.7724774934_a66g.jpg?v=1788411342","url":"https:\/\/www.decords.com\/collections\/3d-printed-pet-furniture-feeding-accessories.oembed","provider":"Decords","version":"1.0","type":"link"}